Attached devices can be cycled on/off with the dedicated power control port. External modem support is available if your network is down. Supported by DSView® 3 management software, SNMP and IPMI, the DSR1024 switch provides hub and spoke failover capability – users can authenticate even when a primary server is unavailable.

• Compact, KVM over IP appliance integrates KVM, an external modem and power control in one solution
• Offers IT administrators the ability to dial into a remotely located server or serial device
• Remotely reboot the server to the BIOS level or even power cycle remote devices --- all from a single DSView 3 software interface
• Uses the same management interface for the data centre and the branch offices
• Built on patented, field-proven KVM over IP technology
• Designed for multi-platform servers, including PS/2, Sun and USB
• DSView 3 software advanced security includes audit logs and the ability to assign individual user rights
• On-board Web browser support

Mechanical		Height		1.10 in. (2.80 cm)
		Width		8.08 in. (20.51 cm)
		Depth		6.30 in. (16.00 cm)
		Weight		1.1 lbs. (0.50 kg) without cables
Environmental		Operating Temp		32 to 104 degrees F (0 to 40 degrees C)
		Storage Temp		-22 to 158 degrees F (-30 to 70 degrees C)
Power		Operating Voltage		100 - 240 VAC
		Power Frequency		50 - 60 Hz autosensing
		Input		20 W maximum
Supported Hardware		Computers		PS/2, Sun and USB
		Monitors		VGA, SVGA (XGA, XGA-II with adaptor), Maximum Local Port: 1600 x 1280, Maximum Remote Port using a DSRIQ module: 1280 x 1024 @ 75 Hz
		Peripherals		PS/2 keyboard, PS/2 mouse, IntelliMouse (PS/2 only), IBM Scrollpoint, Logitech Mouseman+, Logitech Marble Plus, Logitech Marble FX and Kensington Expert mouse
Standards		Approved Agency		UL, FCC, cUL, ICES-003, CE, GS, VCCI, MIC, C-Tick, GOST